Close the Cartridge Access Door, plug back the Power cord, and then turn on the device.Ĭonduct a test print.Try and check if the Carriage can move fully through its path by softly pushing it from side to side. Get rid of all other bits of pieces and foreign material you find inside the printer.Also, move the Carriage to the right if it’s held in the center. Move the Carriage to the left side if it’s stuck on the right, and vice versa.Insert your hand into the Ink Cartridge Access Area and then move the Carriage manually.If there are paper fragments that linger inside the printer, you can expect further jams to happen. Inspect from top to bottom for paper shreds that might be holding back the Carriage. Carefully take out any sheet of paper that’s stuck inside using both your hands.Unplug the Power cord from the back of the device while it’s still on, as a safety precaution. Wait until the Carriage stops and become silent before you proceed. Please turn on your Canon printer and open its Ink Cartridge Access Door.If the problem is still there, proceed to the next solution. Plugin its Power cord and then press the Power button to turn on the device.Ĭonduct a test print. Turn the printer back to its original position.Try opening and closing the tray a few times until the tab gets into the slot if needed. Please make sure that the Paper Tray’s plastic tab is fixed securely on the retainer slot.Be sure to hold the Scanner Lid safely in place with your hands while rotating the device. Rotate the printer onto its side to gain access to its underside. Return the Paper Tray to its original position.If it is, however, you’ll need to replace the tray with a new one. Once you find that the Paper Tray isn’t warped, proceed to the next step. If there’s a gap over 1 mm wide between the ruler and tray, the tray is warped.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |